Product Data Sheet
Tenite Butyrate 264A3720013 Clear, Trsp
|
|
|
| Product Description |
| Tenite cellulosic plastics are noted for their excellent balance of properties - toughness, hardness, strength, surface gloss, clarity, and a warm feel. The mechanical properties of Tenite cellulosic plastics differ with plasticizer levels. Lower plasticizer content yields a harder surface, higher heat resistance, greater rigidity, higher tensile strength, and better dimensional stability. Higher plasticizer content increases impact strength. Tenite cellulosic plastics are available in natural, clear, selected ambers, or smoke transparents and black translucent. Color concentrates are available in let-down ratios from 10:1 to 40:1. Tenite Cellulose Acetate Butyrate 264-13 has a plasticizer level of 13%. It meets FDA requirements for certain food-contact applications when supplied in specific FDA color numbers. |
|
| Typical Properties |
| |
| |
| Plasticizer
|
|
13% |
| Specific Gravity
|
D 792 |
1.18 |
| |
|
| Tensile Stress @ Yield
|
D 638 |
29.0 MPa (4200 psi) |
| Tensile Stress @ Break
|
D 638 |
39.3 MPa (5700 psi) |
| Elongation @ Break
|
D 638 |
50% |
| Flexural Modulus
|
D 790 |
1241 MPa (1.80 ) |
| Flexural Yield Strength
|
D 790 |
39.3 MPa (5700 psi) |
| Rockwell Hardness, R Scale
|
D 785 |
59 |
| Izod Impact Strength, Notched
|
|
|
D 256 |
283 J/m (5.3 ft·lbf/in.) |
|
|
D 256 |
101 J/m (1.9 ft·lbf/in.) |
| |
|
| Deflection Temperature
d |
|
|
D 648 |
69°C (156°F) |
|
|
D 648 |
81°C (178°F) |
| Vicat Softening Temperature
d |
D 1525 |
100°C (212°F) |
| |
|
| Water Absorption, 24 h immersion
|
D 570 |
1.4% |
| Soluble Matter Loss
|
D 570 |
0.1% |
| Weight Loss on Heating
[72 hours @ 80°C (176°F)] |
D 707 |
0.6% |
| |
|
|
|
D 542 |
1.46-1.49 |
| Light Transmission
e |
E 308 |
>90% |
| Haze
e |
D 1003 |
<8.5% |
| Specific Heat
@ 23°C (73°F) |
DSC |
1.26-1.67 kJ/kg·K (0.301-0.399 Btu/lb·°F) |
| Thermal Conductivity
|
C 177 |
0.17-0.33 W/m·K (1.2-2.3 ) |
| Coefficient of Linear Thermal Expansion
|
D 696 |
11- /°C (mm/mm·°C) (6- /°F (in./in.·°F)) |
| Mold Shrinkage
|
D 955 |
0.2-0.6% |
| Dielectric Strength
|
D 149 |
11.8-18.7 kV/mm (300-475 V/mil) |
| Dielectric Constant
1 MHz |
D 150 |
3.3-3.8 |
| Dissipation Factor
1 MHz |
D 150 |
0.01-0.15 |
| Volume Resistivity
|
D 257 |
- ohm·cm |
|
Characteristics
Formula 264 - base.
Comments
Properties reported here are typical of average lots. Eastman makes no representation that the material in any particular shipment will conform exactly to the values given.
|
|
| 27-Jun-2001 3:10:00 PM |
